Graham Audio LS5/9 BBC Licensed Monitor Loudspeaker

GRAHAM AUDIO LS5-9 SET WS

Graham Audio LS5/9 BBC Licensed Monitor Loudspeaker

The Graham Audio LS5/9 is hand made at its South Devon facility in the United Kingdom.

All components are sourced from the UK and Europe. The tweeter is the latest version of the 34mm soft dome unit from French manufacturer Audax that was originally specified by the BBC. All examples are tested and characterised before being matched to the crossover. The bass driver was developed by the highly respected UK drive unit manufacturer Volt, who with their tremendous experience and knowledge built upon the essence of the original BBC design. The bespoke crossover and equalisation network is also built at the Volt facility.

The grille assembly is machined from a single piece of birch plywood and is secured to the cabinet using hidden neodymium magnets. Removing the grille reveals a welcome departure from the original utilitarian BBC design; the veneered baffle.

The internal damping uses medium density Rockwool slabs that are retained by a cloth lining that is applied by our own upholsterer to the original BBC specification. This is more labour intensive that the usual approach of applying foam sheets to the cabinet walls, but Rockwool is kinder to the environment and unlike many types of foam, it won’t decompose in the future.

The next step is to build the front panel assembly. The drive units, crossover PCB and internal wiring is installed by hand and an initial test is performed before the baffle is secured into the cabinet.

The completed LS5/9 is rigorously tested in the Graham Audio measurement laboratory and its dedicated listening room. Provided they meet its quality demands and the requirements of the BBC specification, they are signed off prior to packing and despatch. Records of their objective performance are stored for future support. Each loudspeaker is enclosed within a monogrammed soft cotton bag, which is then placed into its own protective inner carton. Matched pairs of these are encased within an outer transit box ready for shipping.

LS5/9 Specification

System: 2 Way Reflex.

Cabinet: Thin wall construction (critically-damped) Birch plywood.

Finish: Teak Veneer.

Dimensions: 28cm x 27.5cm x 46cm.

Weight: 14kg.

Responses: 50Hz~16kHz +/-3dB.

Nominal Impedance : 8 ohms.

Sensitivity: 87dB SPL (2.83V, 1m).

Maximum Output: Over 100dB for a pair @ 2m.

Bass/Midrange : 200mm Diaphnatone Polypropolene.

Tweeter: Son Audax HD 13D34H.

Crossover: FL 6/36, 24 Precision Elements.

Recommended Amplifier Power: 50 to 200 watts unclipped programme.

Recommended Retail Prices:

Cherry or Oak Finish – AUD$ 10,200.00.

Walnut Finish- AUD$ 10,895.00.

Rosewood Finish- AUD$ 10,895.00.

Ebony Macassar Finish – AUD$ 11,750.00.

LS5/9 Loudspeaker Stands – AUD$ 2,995.00.

E. & O. E.

GRAHAM AUDIO LS5-9 CHERRY WS

Teak Finish

GRAHAM AUDIO LS5-9 ROSEWOOD WS

Rosewood Finish

GRAHAM AUDIO LS5-9 EBONY MACASSAR WS

Ebony Macassar Finish

GRAHAM AUDIO LS5-9 CHERRY WITHOUT GRILLE CROPPED WS

Cherry Finish

SaveSave

SaveSave